D-Link DI524 rev A2

• FCC-ID:
• D-Link DI524 rev A2 == Cameo WLG-2206 / FCC-ID:
• Designed for Cameo by Global Sun Technology / Model: WL RT 2454 NM2
• Additional Cameo / Global Sun (and similar) designs:
  • TRENDnet TEW432VRP rev Bx.x / FCC-ID:
• 1MB Flash, 8MB SDRAM
• 88W8010 radio - second antenna on circuit board (probably Rx only)
• TRENDnet TEW432BRP rev Bx.x version 1.2.0.0019 firmware works the best. You will have to make some small edits to the firmware file in order to load onto the D-Link DI-524 A2.

• Network core supports WPA2 Personal PSK, Web interface to set WPA2 not included.
• The following steps work with the TRENDnet firmware:
  1. Setup router WPA Personal PSK with Password desired. You will not be able to enter another password when you select WPA2 with the modified page.
  2. Test. WPA PSK works......
  3. Save copy of h_wireless.html page.
  4. Uncomment WPA2 settings in HTML text.
  5. Add "base" tag just below "head" tag near top of file.
  6. Load modified h_wireless.html file in browser.
  7. Select WPA2 Personal PSK.
  8. Click apply. WPA2 now enabled.

Hawking HWR54G rev M

• FCC-ID:
• Hawking HWR54G rev M == Abocom ARM914 (same FCC-ID)
• Designed for Abocom by Sercomm / FCC-ID:
• Additional Sercomm (and similar) designs:
  • (similar) Linksys WRT54GC / FCC-ID:
  • (similar) Netgear WRG614 Version 4 / FCC-ID:
• 1MB Flash, 4MB SDRAM
• 88W8000 radio + additional PA chip
• Linksys WRT54GC version 1.06.1 firmware works the best. You will have make to some small edits to the firmware file in order to load onto the Hawking HWR54G rev M.

External PA used with 88W8000 Radio

Antenna Switch

88W8010 Radio

JTAG