This is a mirror of discontinued 'WikiDevi'. Enjoy!
ASUS Tinker Board
ASUS Tinker Board
(90MB0QY1-M0EAY0)
Availability: currently shipping
(Est.) release date: February 2017
(Est.) initial retail price (in USD): $60
Country of manuf.: Taiwan
Amazon image
ASIN
B06VSBVQWS (13px, On Amazon, On CCC)
multiple revisions of this device, use caution
Type: single-board computer
FCC ID: TX2-RTL8723BS
Industry Canada ID: 6317A-RTL8723BS
Power: 5 VDC, 2 A
Connector type: Micro USB
CPU1: Rockchip RK3288 (1.8 GHz, 4 cores)
FLA1: 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (Brand? MicroSD Card)
RAM1: 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (Samsung K4E8E324EB-EGCF × 2)
Expansion IFs: USB 2.0, MicroSD Card slot
USB ports: 4
WI1 module: Realtek RTL8723BS Combo Module (SDIO)
WI1 module IF: SDIO
WI1 chip1: Realtek RTL8723BS
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: MHF4
ETH chip1: Rockchip RK3288
ETH chip2: Realtek RTL8211E
LAN speed: 1G
LAN ports: 1
bgn
Additional chips
USB Audio Codec;Realtek;ALC4040;;1;
4-port USB Hub Controller;Genesys Logic;GL852G;;1;
Power Management IC w/RTC;Rockchip;RK808-B;;1;
Stock bootloader: U-Boot
Stock FW OS: Linux
Third party firmware supported: Armbian
Flags: Bluetooth 4.0, HDMI 2.0, GPIO
Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 69 additional devices
of which 1 are ASUS devices
| FCC ID | |
|---|---|
| ASUS Tinker Board S | TX2-RTL8723BS |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| ASUS Tinker Board | Rockchip | Realtek | |
| ASUS Tinker Board S | Rockchip | Realtek |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Rockchip SoC's with specifications, see Rockchip.
Single Board Computer - Tinker Board
- CPU: Rockchip RK3288 @1.8GHz Quad Core SoC
- RAM: 2GB Dual Channel DDR3 (LPDDR3)
- GPU: Mali-T764 @600MHz
Requirement
- Micro SD card with at least 8GB capacity
- Micro USB cable and a 5V/2A USB power adapter with LPS marking
- Monitor with HDMI cable, Keyboard and Mouse set