Actiontec 802AI

Actiontec 802AI

FCC approval date: 07 December 2001

Type: access point

FCC ID: LNQ802AI

Power: 5 VDC, 2.5 A
Connector type: barrel

CPU1: No Wires Needed Poldhu
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Atmel AT49BV1614-12TC)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Samsung K4S641632H-TC75)

Expansion IFs: none specified

WI1 chip1: No Wires Needed Poldhu
WI1 chip2: Intersil HFA3863
WI1 chip3: Intersil HFA3683A
WI1 802dot11 protocols: b
WI1 antenna connector: none

ETH chip1: No Wires Needed Poldhu
ETH chip2: Lucent LU3X31T
LAN speed: 100M
LAN ports: 1

b

Flags: schematics, block diagram

802dot11 OUI: none specified

For a list of all currently documented No Wires Needed chipsets with specifications, see No Wires Needed.

---

11 Mbps Wireless Access Point
Support page

Actiontec's FCC docs reference the Poldhu chip as a ISL3865CK.

"ACTIONTEC", "47-0045-28AF", and "802AI Rev. 1A" is silkscreened on the board in the FCC photos.

The manual shows a sample SSID of default and a MAC with a 00:20:E0 (Actiontec) OUI.