Agere ORiNOCO AP-2000 AE

Agere AP-2000 AE
Availability: common

Type: access point

Power: 5 VDC, ? A
Connector type: other
Power over Ethernet (PoE) tag: non-standard (otherwise unspecified)

CPU1: Intel StrongARM SA-110 (233 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Intel E28F320J3A-110 × 2)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ICSI IS42S16400-7T × 2)

Expansion IFs: PCMCIA (32-bit)
PCMCIA slots: 2
Serial: DE-9

No wireless interfaces specified.

ETH chip1: National Semiconductor DP83815
LAN speed: 100M
LAN ports: 1

no 802.11 protocols specified

Stock FW OS: VxWorks

Default SSID: My Wireless Network A (6 addl. devices), My Wireless Network B (4 addl. devices)
Default IP address: 10.0.0.1
the IP 10.0.0.1 is used by 19 additional devices
of which 0 are Agere devices
Default login user: blank
Default login password: public
blank:public credentials used by 16 additional devices
of which 0 are Agere devices

802dot11 OUI: none specified

For a list of all currently documented Intel chipsets with specifications, see Intel.

---

Device uses a StrongARM SA-110 (part number 21281EB), Intel 21285AB, TI PCIbus PCI1225PDV for the PC Card controller, and DP83815CVNG for the ethernet controller.

The AP-2000 (with Lucent/Agere/Proxim's firmware) can function as a 802.11b access point using an ORiNOCO PC Card or ORiNOCO PC Card (Ruby), an 802.11bg access point using a Proxim 8800-FC, and an 802.11a access point using an Agere PC50E-8-FC/A.

Some AP2ks have native POE capability - this is one (all?) of them.

Images

• 

  board top

• 

  board bottom