Belkin F7D4302

Belkin F7D4302 v1

Manuf/OEM/ODM Arcadyan WG8017F22

FCC approval date: 23 February 2010
(Est.) release date: 24 March 2010
UPC: 722868757383 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B003CJTNLI (13px, On Amazon, On CCC)

Type: wireless router

FCC ID: K7SF7D4302V1
Industry Canada ID: 3623A-F7D4302V1

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Broadcom BCM4718A1 (533 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Eon EN29LV640B-90TIP)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM68B16CWPA-25H)

Expansion IFs: USB 2.0
USB ports: 1

WI1 chip1: Broadcom BCM4718A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Broadcom BCM43224
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: Broadcom BCM4718A1
Switch: Broadcom BCM5325E
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

abgn

Third party firmware supported: DD-WRT • (List), Tomato (Toastman) • (List)

Default SSID: Belkin.XXXX (6 addl. devices), Belkin.XXXX_5GHz (2 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 279 additional devices
of which 97 are Belkin devices

802dot11 OUI: 94:44:52 (17 E, 22 W, 2010)
Ethernet OUI: 94:44:52 (17 E, 22 W, 2010)

	FCC ID
Belkin F7D8302	K7SF7D4302V1

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

---

Play Wireless Router
 • Support page

"P/N: 141701620001J REV: 01" is silkscreened on the board.

The same hardware is used by the F7D8302 (mention on DD-WRT forums).

Belkin F7D4302 v1 on TechInfoDepot

On the DD-WRT forums (internal shots)
Eko's initial support of partial support for the F7D4301 and most major thread for the device

Supports DD-WRT Kong Mod (main Kong Mod thread)

On the TomatoUSB forum

This device seems to be working fine with the latest Toastman builds (as of 12/2012).

The default SSIDs are Belkin.XXXX and Belkin.XXXX_5GHz where XXXX appears to 5 followed by the last three hex digits of the wireless interface MAC address (though this could be incorrect). An example SSID set of SSIDs are Belkin.5BB8 and Belkin.5BB8_5GHz with MAC 94:44:52:25:4B:B8.

Images

• external
• 

  angled

• 

  back

• 

  label

• internal
• 

  board top

• 

  WiSoC

• 

  Arcadyan label on the Flash

• 

  Flash, label removed

• 

  RAM

• 

  2.4GHz RF

• 

  5GHz RF

• 

  BCM43224

• 

  Switch

• 

  Arcadyan label

• 

  board bottom