This is a mirror of discontinued 'WikiDevi'. Enjoy!
Buffalo Kuro-box Pro
Buffalo Kuro-box Pro
Type: NAS
Power: 120 VAC ~ 60 Hz, ? A
Connector type: C7
CPU1: Marvell 88F5182 (400 MHz)
FLA1: 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (STMicroelectronics NAND02GW3B2CN6)
FLA2: 256 KiB 0.25 MiB <br />262,144 B <br />2,048 Kib <br />2 Mib <br />2.441406e-4 GiB <br /> (SST 39VF020)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Elpida E5116ANSE × 2)
Expansion IFs: USB 2.0, SATA, PCIe x1
Mini PCIe slots: 1
USB ports: 2
SATA ports: 2
JTAG: yes
Serial: yes, 3.3V TTL, 4-pin header, (115200,8,N,1)
ETH chip1: Marvell 88F5182
ETH chip2: Marvell 88E1118R
LAN speed: 1G
LAN ports: 1
Additional chips
I2C Bus Serial RTC;Ricoh;RS5C372A;;1;
8-bit Single-Chip Microcontroller;NEC;μPD78F0500;;1;
16-bit D-Type Latch;Texas Instruments;SN74LVC16373A;;2;
Quad Differential PCIe Clock Source;IDT;ICS557-03;;1;
Quadruple 2-Input Positive-And Gate;Texas Instruments;SN74LVC08A;;1;
30V, 7A Power Switching DC/DC Converter;Rohm Semiconductor;SP8K3;;1;
4A Low Dropout Regulator;Global Mixed-mode Technology;G973;;2;
Field Programmable DSP Switcher;Marvell;88PG847B;;1;
3A Peak Current Step-Down Regulator;Marvell;MVPG31;;2;
Stock bootloader: U-Boot 1.1.1 Marvell 1.12.1 TINY
Stock FW OS: Linux 2.6.12-6-arm1
Flags: RTC w/ battery backup, fan
Default IP address: 192.168.11.150
the IP 192.168.11.150 is used by 1 additional devices
of which 1 are Buffalo devices
Default login user: root
Default login password: kuroadmin
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
----
Kuro-Box/Pro Single Disk NAS Enclosure
Buffalo Wiki alternative firmware
- Main board silkscreened with "MADE IN JAPAN" and "MVLS2EG-CA"
- PCIe and SATA ports are on sub-board silkscreened with "LSGLSUB-CA" and "MADE IN CHINA"