This is a mirror of discontinued 'WikiDevi'. Enjoy!
D-Link DIR-865L
Jump to navigation
Jump to search
D-Link DIR-865L A1
Manuf/OEM/ODM Alpha Networks WRG-AC01
FCC approval date: 15 June 2012
(Est.) release date: 02 July 2012
(Est.) initial retail price (in USD): $189.99
UPC: 790069379710 (UPC DB, On eBay)
Country of manuf.: China
Type: wireless router
FCC ID: KA2IR865LA1
Industry Canada ID: 4216A-IR865LA1
Power: 12 VDC, 3 A
Connector type: barrel
CPU1: Broadcom BCM4706
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Micron MT47H64M16HR-25E:H × 2)
Expansion IFs: USB 2.0, Mini PCIe
USB ports: 1
Serial: yes, (115200,8,N,1)
WI1 module: Alpha Networks WMC-AC01
WI1 module IF: Mini PCIe (oversized)
WI1 chip1: Broadcom BCM4360
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM4331
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM4706
Switch: Broadcom BCM53125
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
Stock bootloader: CFE 6.30.39.2001 (r334376)
Stock FW OS: Linux 2.6.22
Third party firmware supported: vineyard's custom Tomato version @ linksysinfo.org
Flags: boot log
Default SSID: dlink-XXXX (33 addl. devices), dlink-media-XXXX (1 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 741 additional devices
of which 210 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 314 additional devices
of which 180 are D-Link devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Wireless AC 1750 Dual Band Cloud Router / Cloud Router 5700
Product page
• Support page
"8WRGAC01.2A1G" is silkscreened on the back of the main board.
- The main board is using TAICON electrolytic capacitors.
"8WMCAC01.2A1G" is silkscreened on the 802.11ac wireless module in the FCC photos.
The default SSID patterns for the device are dlink-XXXX and dlink-media-XXXX. XXXX is the last two octets of the respective wireless interface's MAC address (upper case letters).
The power adapter shown in the FCC photos (and presumably the one included with the device) is an Asian Power Devices WA-36C12R (100-240VAC ~ 50-60Hz, 1A Max. -> 12VDC, 3A).
Wi-Fi Certified (alt.) (as of 07/20/2012)
Serial
Pinout
The pinout seems to be the standard current Alpha pinout.
JP2 [RxD] [3.3][GND][TxD]
Info dump
cat /proc/mtd
# cat /proc/mtd dev: size erasesize name mtd0: 0085b000 00010000 "rootfs" mtd1: 00f00000 00010000 "upgrade" mtd2: 00010000 00010000 "devconf" mtd3: 00010000 00010000 "devdata" mtd4: 00020000 00010000 "langpack" mtd5: 01000000 00010000 "flash" mtd6: 00030000 00010000 "u-boot" mtd7: 00010000 00010000 "nvram" mtd8: 00080000 00010000 "mydlink"
wl -i wifia0 revinfo
# wl -i wifia0 revinfo vendorid 0x14e4 deviceid 0x43a2 radiorev 0x32069000 chipnum 0x4360 chiprev 0x2 chippackage 0x1 corerev 0x28 boardid 0x621 boardvendor 0x14e4 boardrev P307 driverrev 0x61e277d ucoderev 0x2f1006e bus 0x1 phytype 0xb phyrev 0x0 anarev 0x0
wl -i wifig0 revinfo
# wl -i wifig0 revinfo vendorid 0x14e4 deviceid 0x4332 radiorev 0x2059000 chipnum 0x4331 chiprev 0x2 chippackage 0x8 corerev 0x1d boardid 0x617 boardvendor 0x14e4 boardrev P102 driverrev 0x61e277d ucoderev 0x2f1006e bus 0x1 phytype 0x7 phyrev 0x1 anarev 0x0
other
| stock FW (I think) boot log |
|---|
SVN revision: 668
Decompressing...done
CFE version 6.30.39.2001 (r334376) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Jul 16 13:56:31 CST 2012 (michael_lee@Porsche)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 327680(0x50000)
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
bcm_robo_enable_switch: EEE is disabled
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.39.2001 (r334376)
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
CFE mem: 0x80700000 - 0x807A57C0 (677824)
Data: 0x8073AA10 - 0x8073DDC0 (13232)
BSS: 0x8073DDC0 - 0x8073F7C0 (6656)
Heap: 0x8073F7C0 - 0x807A37C0 (409600)
Stack: 0x807A37C0 - 0x807A57C0 (8192)
Text: 0x80700000 - 0x8073AA08 (240136)
Board Name: WRGAC01
SVN revision: 668
We disable the arp for self.
We disable the arp for self.
Device eth0: hwaddr 00-90-4C-0D-B0-18, ipaddr 192.168.0.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Dest=80001000, source =807a57c0, filename=flash1.trx
verify_seama: data=0x8073a4a0, size=-2139465792
SEAMA ==========================================
magic : 5ea3a417
meta size : 36 bytes
meta data : dev=/dev/mtdblock/1
meta data : type=firmware
meta data :
meta data :
image size : 10203168 bytes
verify_seama: signature=[(null)], type=[firmware]
checksum : 473A291ABB7AEC4DA9B61E48D7DAF9BD
digest : 473A291ABB7AEC4DA9B61E48D7DAF9BD
Selected !!!
================================================
seama check OK!!
insize = 2097152, out size =8388608
uncompressed size = 4624518
lzma decompress success !
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (joely@enzo) (gcc version 4.2.3) #2 Thu Jul 19 17:44:53 CST 2012
CPU revision is: 00019749
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
memory: 08000000 @ 87fff000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0 -> 131072
HighMem 131072 -> 589823
early_node_map[2] active PFN ranges
0: 0 -> 32767
0: 557055 -> 589823
Built 1 zonelists. Total pages: 65535
Kernel command line: root=/dev/mtdblock0 console=ttyS0,115200 noinitrd
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5300 rev 1 at 600 MHz
Using 300.000 MHz high precision timer.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 253664k/131068k available (3549k kernel code, 8184k reserved, 742k data, 224k init, 131072k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Initializing host
PCI: Reset RC
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
PCI/PCIe coreunit 1 is set to bus 2.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
PCI: Fixing up bus 2
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
fuse init (API version 7.8)
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.7
pflash: found no supported devices
sflash: the flash image has SEAMA header, retry: 0
sflash: squashfs filesystem found at offset 1769536
Creating 9 MTD partitions on "sflash":
0x001b0060-0x00a0b060 : "rootfs"
0x00050000-0x00f50000 : "upgrade"
0x00040000-0x00050000 : "devconf"
0x00030000-0x00040000 : "devdata"
0x00fd0000-0x00ff0000 : "langpack"
0x00000000-0x01000000 : "flash"
0x00000000-0x00030000 : "u-boot"
0x00ff0000-0x01000000 : "nvram"
0x00f50000-0x00fd0000 : "mydlink"
No NAND flash type found
nflash: found no supported devices
No NAND flash type found
brcmnand: found no supported devices
usbmon: debugfs is not available
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: EHCI Fastpath: New EHCI driver starting
ehci_hcd 0000:00:04.1: irq 6, io mem 0x18004000
ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 6, io mem 0x18009000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
u32 classifier
nf_conntrack version 0.5.0 (2047 buckets, 16376 max)
xt_time: kernel timezone is -0000
BCM fast NAT: INIT
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
Failed to execute /init
init started: BusyBox v1.14.1 (2012-07-19 17:46:19 CST)
starting pid 670, tty '': '/etc/init.d/rcS'
Algorithmics/MIPS FPU Emulator v1.5
[/etc/init.d/S10init.sh]
[/etc/init.d/S11upboot.sh]
[/etc/init.d/S15udevd.sh]
[/etc/init.d/S16ipv6.sh]
[/etc/init.d/S19init.sh]
[/etc/init.d/S20init.sh]
DEFNODE[/etc/defnodes/S11devdata.xml]
DEFNODE[/etc/defnodes/S12flashspeed.php]
DEFNODE[/etc/defnodes/S13dfs.php]
DEFNODE[/etc/defnodes/S14setchlist.php]
DEFNODE[/etc/defnodes/S20device.xml]
DEFNODE[/etc/defnodes/S22timezone.php]
[/etc/scripts/setdate.sh] 01/01/2000 ...
Sat Jan 1 08:00:04 GMT 2000
DEFNODE[/etc/defnodes/S30device.php]
DEFNODE[/etc/defnodes/S30device.xml]
DEFNODE[/etc/defnodes/S31diagnostic.xml]
DEFNODE[/etc/defnodes/S31locale.php]
DEFNODE[/etc/defnodes/S33wifi.php]
DEFNODE[/etc/defnodes/S40device.xml]
DEFNODE[/etc/defnodes/S40links.php]
DEFNODE[/etc/defnodes/S90opendns.php]
DEFNODE[/etc/defnodes/S90sessions.php]
DEFNODE[/etc/defnodes/S90upnpigd.php]
DEFNODE[/etc/defnodes/S90upnpwfa.php]
DEFNODE[/etc/defnodes/S91upnpigd2.php]
SERVD: start service [LOGD]
[/etc/init.d/S20interfaces.sh]
/proc/sys/net/ipv6/conf/eth2/accept_dad: can't create
/proc/sys/net/ipv6/conf/eth2/disable_ipv6: can't create
SIOCGIFINDEX: No such device
SIOCGIFFLAGS: No such device
[/etc/init.d/S21usbmount.sh]
[/etc/init.d/S22mydlink.sh]
[/etc/init.d/S23udevd.sh]
[/etc/init.d/S45gpiod.sh]
Factory reset time : 5 secs
00: WPS Button using GPIO #14, input mode.
01: Factory Reset Button using GPIO #5, input mode.
02: Power_Status LED Green using GPIO #0, output mode.
03: Power_Status LED Orange using GPIO #1, output mode.
04: Internet LED Orange using GPIO #3, output mode.
05: Internet LED Green using GPIO #2, output mode.
06: USB using GPIO #7, output mode.
et interface not found
[/etc/init.d/rcS] done!
SERVD: event [WANPORT.LINKDOWN] not found!
[/etc/init0.d/S21layout.sh]: start ...
SERVD: start service [LAYOUT]
[/etc/init0.d/S40event.sh]: start ...
ctf: module license 'Proprietary' taints kernel.
et_module_init: passivemode set to 0x0
et_module_init: et_txq_thresh set to 0x0
bcm_robo_enable_switch: EEE is disabled
SERVD: event [SEALPAC.LOAD/default]
SEAMA: '/dev/mtdblock/4' is not eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.39.2001 (r334376)
a seama file !
[/etc/init0.d/S40gpioevent.sh]: start ...
eneth0.1: Setting MAC address to 90 94 e4 fc b6 05.
VLAN (eth0.1): Underlying device (eth0) has same MAC, not checking promiscious mode.
eth0.2: Setting MAC address to 90 94 e4 fc b6 07.
device eth0 entered promiscuous mode
VLAN (eth0.2): Setting underlying device (eth0) to promiscious mode.
[/etc/init0.d/S41autowan.sh]: start ...
eth0.1: dev_set_promiscuity(master, 1)
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0.1) entering forwarding state
[/etc/init0.d/S41autowanv6.sh]: start ...
[/etc/init0.d/S41event.sh]: start ...
SERVD: start service [LOGD]
SERVD: service [LOGD] is already started.
SERVD: start service [PHYINF.ETH-1]
[/etc/init0.d/S41inf.sh]: start ...
SERVD: start service [PHYINF.ETH-2]
[/etc/init0.d/S41smart404.sh]: start ...
PHYINF.ETH-2: cfg[00:de:fa:1a:02:00] curr[00:00:00:00:00:00], restart the device !!!
SERVD: start service [PHYINF.ETH-3]
[/etc/init0.d/S42event.sh]: start ...
[/etc/init0.d/S42pthrough.sh]: start ...
[/etc/init0.d/S43mydlinkevent.sh]: start ...
[/etc/init0.d/S51wlan.sh]: start ...
SERVD: start service [BRIDGE]
BRIDGE: The device is not in the bridge mode.
SERVD: start service [LAN]
SERVD: start service [WAN]
PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
srom rev:11
eth1: Broadcom BCM43a2 802.11 Wireless Controller 6.30.39.2001 (r334376 WLTEST)
PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
sprom_read_pci: buf[0] = 0xffff, returning bad-crc
sprom_read_pci: buf[0] = 0xffff, returning bad-crc
sprom_read_pci: buf[0] = 0xffff, returning bad-crc
srom rev:0
eth2: Broadcom BCM4331 802.11 Wireless Controller 6.30.39.2001 (r334376 WLTEST)
SERVD: start service [DEVICE.PASSTHROUGH]
/proc/pthrough/ipv6: can't create
/proc/pthrough/pppoe: can't create
SERVD: start service [MYDLINK.LOG]
SERVD: start service [WIFI.PHYINF]
SERVD: service [WIFI.PHYINF] return error 108.
SERVD: start service [IPTABLES]
wlc_phy_cal_init_acphy: NOT Implemented
[/etc/init0.d/S60shareport.sh]: start ...
CONNTRACK_MAX=36000
CONNTRACK_MIN=36000
[/etc/init0.d/S65ddnsd.sh]: start ...
[/etc/init0.d/S65user.sh]: start ...
[/etc/init0.d/S80telnetd.sh]: start ...
Create /var/proc/alpha symbolic link...
Enable Fast Route
[/etc/init0.d/rcS] done!
Please press Enter to activate this console. SERVD: start service [IP6TABLES]
SERVD: start service [IPTABLES]
SERVD: service [IPTABLES] is already started.
SERVD: start service [IP6TABLES]
SERVD: service [IP6TABLES] is already started.
SERVD: start service [INET.LAN-1]
[/var/servd/INET.LAN-1_start.sh]: starting LAN-1...
SERVD: event [LAN-1.UP/default]
/proc/nf_accelerate_to_local: can't create
[/var/servd/INET.LAN-1_start.sh]: starting LAN-1 done !!!
SERVD: start service [INET.LAN-2]
[/var/servd/INET.LAN-2_start.sh]: starting LAN-2...
SERVD: event [LAN-2.UP/default]
[/var/servd/INET.LAN-2_start.sh]: starting LAN-2 done !!!
SERVD: start service [INET.LAN-4]
#!/bin/sh
# No inet profile!!
exit 9
SERVD: start service [INET.LAN-5]
#!/bin/sh
# No inet profile!!
exit 9
SERVD: start service [INET.LAN-6]
ifsetup: (LAN-6) not active.
SERVD: service [INET.LAN-6] return error 8.
SERVD: start service [IPTMACCTRL]
SERVD: start service [IPTURLCTRL]
SERVD: start service [ACCESSCTRL]
SERVD: start service [IPTPORTT]
SERVD: start service [IP6T.LAN-1]
SERVD: start service [IP6T.LAN-2]
SERVD: start service [IP6T.LAN-3]
SERVD: start service [IP6T.LAN-4]
SERVD: start service [IP6T.LAN-5]
SERVD: start service [IP6T.LAN-6]
SERVD: start service [IPTABLES]
SERVD: service [IPTABLES] is already started.
SERVD: start service [IP6TABLES]
SERVD: service [IP6TABLES] is already started.
SERVD: start service [INET.WAN-1]
[/var/servd/INET.WAN-1_start.sh]: starting WAN-1...
[/var/servd/INET.WAN-1_start.sh]: starting WAN-1 done !!!
SERVD: start service [INET.WAN-2]
ifsetup: (WAN-2) not active.
SERVD: service [INET.WAN-2] return error 8.
SERVD: start service [INET.WAN-3]
[/var/servd/INET.WAN-3_start.sh]: starting WAN-3...
WAN-3 a is link local interface.
SERVD: event [WAN-3.UP/default]
[/var/servd/INET.WAN-3_start.sh]: starting WAN-3 done !!!
SERVD: start service [INET.WAN-4]
ifsetup: (WAN-4) not active.
SERVD: service [INET.WAN-4] return error 8.
SERVD: start service [INET.WAN-5]
ifsetup: (WAN-5) not active.
SERVD: service [INET.WAN-5] return error 8.
SERVD: start service [IPTMASQ]
/proc/sys/net/ipv4/ip_personality_sport: can't create
/proc/sys/net/ipv4/ip_personality_enable: can't create
SERVD: start service [IPTVSVR]
SERVD: start service [IPTPFWD]
SERVD: start service [IPTPORTT]
SERVD: service [IPTPORTT] is already started.
SERVD: start service [IPTDMZ]
SERVD: start service [IPT.WAN-1]
SERVD: start service [IP6T.WAN-1]
SERVD: start service [IPT.WAN-2]
SERVD: start service [IP6T.WAN-2]
SERVD: start service [IPT.WAN-3]
SERVD: start service [IP6T.WAN-3]
SERVD: start service [IPT.WAN-4]
SERVD: start service [IP6T.WAN-4]
SERVD: start service [IPT.WAN-5]
SERVD: service [IPT.WAN-5] return error 108.
SERVD: start service [IP6T.WAN-5]
SERVD: service [IP6T.WAN-5] return error 108.
SERVD: stop service [IPT.LAN-1]
SERVD: service [IPT.LAN-1] is already stopped.
SERVD: start service [IPT.LAN-1]
/proc/fastnat/forskipsupport: can't create
SERVD: stop service [IPT.LAN-2]
SERVD: service [IPT.LAN-2] is already stopped.
SERVD: start service [IPT.LAN-2]
/proc/fastnat/forskipsupport: can't create
SERVD: stop service [IPT.LAN-3]
SERVD: service [IPT.LAN-3] is already stopped.
SERVD: start service [IPT.LAN-3]
SERVD: service [IPT.LAN-3] return error 108.
SERVD: stop service [IPT.LAN-4]
SERVD: service [IPT.LAN-4] is already stopped.
SERVD: start service [IPT.LAN-4]
SERVD: service [IPT.LAN-4] return error 108.
SERVD: stop service [IPT.LAN-5]
SERVD: service [IPT.LAN-5] is already stopped.
SERVD: start service [IPT.LAN-5]
SERVD: service [IPT.LAN-5] return error 108.
SERVD: stop service [IPT.LAN-6]
SERVD: service [IPT.LAN-6] is already stopped.
SERVD: start service [IPT.LAN-6]
SERVD: service [IPT.LAN-6] return error 108.
SERVD: start service [PHYINF.WIFI]
SERVD: start service [DEVICE.ACCOUNT]
Password for 'Admin' has been updated
SERVD: start service [SHAREPORT]
|
| cat /proc/bus/pci/devices |
|---|
0000 14e40800 8 18000000 0 0 0 0 0 0 1000 0 0 0 0 0 800 0008 14e44715 4 18002000 0 0 0 0 0 0 1000 0 0 0 0 0 800 et 0020 14e4471a 6 18009000 0 0 0 0 0 0 1000 0 0 0 0 0 800 ohci_hcd 0021 14e4471a 6 18004000 0 0 0 0 0 0 1000 0 0 0 0 0 800 ehci_hcd 0028 14e40820 3 18005000 0 0 0 0 0 0 1000 0 0 0 0 0 800 0030 14e40820 5 1800e000 0 0 0 0 0 0 1000 0 0 0 0 0 800 0038 14e4052e e 18006000 0 0 0 0 0 0 1000 0 0 0 0 0 800 0040 14e4080e 10 18007000 0 0 0 0 0 0 1000 0 0 0 0 0 800 0048 14e40534 f 18008000 0 0 0 0 0 0 1000 0 0 0 0 0 800 0100 14e45300 3 8000004 0 4 0 0 0 0 4000 0 8000000 0 0 0 0 0101 14e40000 3 8004004 0 4 0 0 0 0 4000 0 8000000 0 0 0 0 0108 14e443a2 3 8008004 0 8200004 0 0 0 0 8000 0 200000 0 0 0 0 wl 0200 14e45300 5 40000004 0 4 0 0 0 0 4000 0 8000000 0 0 0 0 0201 14e40000 5 40004004 0 4 0 0 0 0 4000 0 8000000 0 0 0 0 0208 14e44331 5 40008004 0 0 0 0 0 0 4000 0 0 0 0 0 0 wl |
| ps |
|---|
# ps
PID USER VSZ STAT COMMAND
1 root 748 S init
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
32 root 0 SW< [kblockd/0]
33 root 0 SW< [ksuspend_usbd]
36 root 0 SW< [khubd]
68 root 0 SW [pdflush]
69 root 0 SW [pdflush]
70 root 0 SW< [kswapd0]
71 root 0 SW< [aio/0]
624 root 0 SW< [mtdblockd]
695 root 904 S < udevd --daemon
716 root 1684 S xmldb -n wrgac01_dlob.hans_dir865 -t
717 root 932 S servd -d schedule_off
850 root 868 S logd -p notice
852 root 832 S klogd -p notice
886 root 872 S gpiod -w 0
977 root 0 SW< [scsi_eh_0]
979 root 0 SW< [usb-storage]
1211 root 1096 S /var/run/fakedns --port=63481 --address=/dlinkrouter/
1265 root 872 S arpmonitor -i br0
1715 root 836 S portt -c DNAT.PORTT
1716 root 908 S ddnsd
1756 root 840 R telnetd -l /usr/sbin/login -u Alphanetworks:wrgac01_d
1824 root 848 S /bin/sh /etc/scripts/cpuload.sh
1844 root 864 S -/bin/sh
2353 root 992 S udhcpc -i eth0.2 -H dlinkrouter -p /var/servd/WAN-1-u
2716 root 0 SW< [sxuptp-wq]
2717 root 0 SW [sxuptp-ka]
2731 root 0 SW [jcpcore]
2741 root 1076 S /usr/sbin/jcpd -i br0
2747 root 1060 S /usr/sbin/hotplugd -D
2748 root 1060 S /usr/sbin/hotplugd -D
2750 root 1060 S /usr/sbin/hotplugd -D
4342 root 1040 S updatewifistats -s /etc/scripts/upwifistatshlper_G_ba
4520 root 1040 S updatewifistats -s /etc/scripts/upwifistatshlper_A_ba
4550 root 1524 S hostapd /var/topology.conf
4684 root 2872 S stunnel /var/stunnel.conf
4709 root 1016 S udhcpd /var/servd/LAN-1-udhcpd.conf
4817 root 1016 S udhcpd /var/servd/LAN-2-udhcpd.conf
5132 root 1104 S mldproxy -c /var/run/mldproxy.conf -s /etc/scripts/ml
5147 root 1224 S mDNSResponderPosix -b -i br0 -f /var/rendezvous.conf
5242 root 1084 S dnsmasq -C /var/servd/DNS.conf
5324 root 5692 S smbd -D
5326 root 5468 S nmbd -D
5333 root 5692 S smbd -D
5482 root 1012 S lld2d -c /var/lld2d.conf br0 wifig0 wifia0
5525 root 4988 S httpd -f /var/run/httpd.conf
5552 root 860 S nameresolv -n -l -i br0 -r dlinkrouter -r dlinkrouter
10020 root 956 S /usr/sbin/login Alphanetworks wrgac01_dlob.hans_dir86
10542 root 848 S sh -c /bin/sh
10543 root 868 S /bin/sh
11870 root 744 S sleep 1
11871 root 752 R ps
|
| lsmod |
|---|
# lsmod Module Size Used by nf_nat_pptp 3040 0 nf_conntrack_pptp 6736 1 nf_nat_pptp nf_conntrack_proto_gre 4768 1 nf_conntrack_pptp nf_nat_proto_gre 2256 1 nf_nat_pptp nf_nat_rtsp 5680 0 nf_conntrack_rtsp 73280 1 nf_nat_rtsp nf_nat_sip 5248 0 nf_conntrack_sip 9504 1 nf_nat_sip jcp_cmd 8000 0 jcp 12064 1 jcp_cmd sxuptp_driver 5520 0 sxuptp_devfilter 5792 0 sxuptp 44304 3 jcp_cmd,sxuptp_driver,sxuptp_devfilter wl 3485488 0 igs 20336 1 wl emf 24160 2 wl,igs et 68272 0 ctf 17152 0 |
The default telnet credentials are Alphanetworks (user) and wrgac01_dlob.hans_dir865 (password).
Images
board top
board top, shields off, wireless module removed
board top, most everything off
board top
board top, under SoC shield
BCM4706 SoC
Micron RAM (FBGA code D9LHT)
BCM53125 GbE Switch
802.11ac wireless module, shield off
802.11ac wireless module, shield off, partial closeup
802.11ac wireless module, bottom
BCM4360, card in, heat spreader off
BCM4360 closeup
over the BCM4331, #1
over the BCM4331, #2
board top, 2.4GHz RF section, shield off
board top, 2.4GHz RF section, nothing
board top, angled, LED side
board top, right rear, over top, power side view
board top, over top, power side view
board top, right front, over top, power side view
board bottom
board bottom, shield off
ALPHA board P/N
Flash
board bottom, 2.4GHz RF, shield off
board bottom, 2.4GHz RF, partial closeup
