DBL GoIP-4

DBL GoIP-4

Amazon image

ASIN
B00L11NSXI (13px, On Amazon, On CCC)

Type: GSM VoIP gateway

Power: 12 VDC, ? A

CPU1: Marvell 88E6218 (133 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Brand? Model?)

Expansion IFs: none specified
Serial: yes, 3.3V TTL

ETH chip1: Marvell 88E6218
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1

Flags: VoIP, GSM

Ethernet OUI: none specified

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

----

GSM VoIP Gateway

Product page

4 internal GSM modems

Bootloader (serial)

Initializing...
mem: 16M/16
Hit any key for boot setup
ARMboot Rev 1.6 for RD-88E62x8 (Jan 18 2007-17:27:34)
ARMboot LE version
ARMboot code: 00380000 -> 003904c0
ARMboot->
ARMboot-> help
go      - start application at address 'addr'
tftp- boot image via network using TFTP protocol
md      - memory display
mm      - memory modify (auto-incrementing)
nm      - memory modify (constant address)
mw      - memory write (fill)
printenv- print environment variables
setenv  - set environment variables
saveenv - save environment variables to persistent storage
defaultenv- get default environment variables
reset   - Perform RESET of the CPU
echo    - echo args to console
version - print monitor version
help    - print online help
?       - alias for 'help'
flash test
ARMboot-> printenv
bootdelay=5
baudrate=38400
ethaddr=00:40:BC:xx:xx:xx
ipaddr=192.168.1.2
serverip=192.168.1.1
gatewayip=192.168.1.254
netmask=255.255.255.0
bootfile=boot.bin
sdramImgAddr=0x00100000
flashAddr=0x3FC00000
bootSource=arch
Environment size: 219/4092 bytes
ARMboot->

Boot (serial)

Initializing...
mem: 16M/16
Hit any key for boot setup
boot kernel: 200000
## Starting application at 0x00200000
Uncompressing Lin... done, booting tinit start
starting rcS...
exec external command: hwinfo
exec external command: insmod
Using /lib/modules/wd.o
mount failed: No such device
exec external command: insmod
Using /lib/modules/unimac.o
syscfg: cannot send to /tmp/.syscfg-server: No such file or directory
exec external command: insmod
Using /lib/modules/gpio_drv.o
starting rc...
Login: exec external command: /sbin/svcd
exec external command: reset_monitor
exec external command: gpio
open gpio fd=8
gpio 9 state=1
exec external command: gpio
open gpio fd=8
gpio 9 state=1
cannot stat /usr/etc/digit_map: No such file or directory
starting httpd...
starting audio...
insmod -x /usr/lib/modules/vpdsp_drv.o freq=96 channels=4
rstn_pin=1 hint_pin=2 ackn_pin=3 afe=4 jb_mode=0 jb_min=60
Using /usr/lib/modules/vpdsp_drv.o
exec external command: gpio
open gpio fd=8
gpio 1 state=1
exec external command: vpdsptool
parse cmd:
  type=a04d
  length=7
  sequence=0
  timestamp=0
  payload:
    #0: e600
    #1: 6af7
    #2: fff8
    #3: dd00
    #4: d000
    #5: f400
    #6: 0100
got command ack: 0000

starting ata...
starting network...
command hostname not found
exec external command: rgcfg
User's Net Config:
        VLAN 1 (eth0):
                MAC address = 38:3f:10:xx:xx:xx
                Port Set = { 0, 1, 5 }
        VLAN 2 (eth1):
                MAC address = 38:3f:10:xx:xx:xx
                Port Set = { 2, 3, 4, 6, 5 }
Switch Information:
        Device Name      = 88E6218 (Firefox-HG)
        Revision         = 2
        Device Number    = 0
        Device Enabled   = Yes
        Base Reg Address = 16
        Number of Ports  = 7
        CPU Port         = 5

Init: User network configuration initialized
command 50 not found
starting PC port...
starting telnetd...
exec external command: /usr/sbin/telnetd
starting LAN port...
starting dhcpd...
starting nat...
exec external command: iptables
starting autocfg...
exec external command: /usr/etc/rc.d/init.d/autocfg.start
starting ntp...
starting ipphone...
cannot background builtin commands
Login: