HP ProCurve Wireless AP 10ag NA (J9140A)

HP ProCurve Wireless AP 10ag NA (J9140A)

Manuf/OEM/ODM Delta Networks

FCC approval date: 24 August 2007
UPC: 883585522545 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B000Z6XO2U (13px, On Amazon, On CCC)

Type: access point

FCC ID: B94RSVLC-0702
Industry Canada ID: 466F-RSVLC702

Power: 12 VDC, 1.25 A
Connector type: barrel
Power over Ethernet (PoE) tag: 802.3af, standard

CPU1: Atheros AR5312A
FLA1: ? MiB (Macronix Model?)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ESMT M12L64164A-7T × 2)

Expansion IFs: none specified

WI1 chip1: Atheros AR5312A
WI1 chip2: Atheros AR5112A
WI1 802dot11 protocols: a
WI1 antenna connector: U.FL
WI2 chip1: Atheros AR5312A
WI2 chip2: Atheros AR2112A
WI2 802dot11 protocols: bg
WI2 antenna connector: U.FL

ETH chip1: Atheros AR5312A
ETH chip2: Realtek RTL8201CP
LAN speed: 100M
LAN ports: 1

abg

Default SSID: wireless-g, wireless-a
Default IP address: 192.168.1.14
Default login user: admin
Default login password: password
admin:password credentials used by 406 additional devices
of which 0 are HP devices

802dot11 OUI: 00:1D:B3
Ethernet OUI: 00:1D:B3

For a list of all currently documented Atheros chipsets with specifications, see Atheros.

---

Manual

"2976300501" is silkscreened on the board in the FCC photos.

The (two) RAM chips appear to be M12L64164A-7Ts for 16MB total..

This device has an additional model of RSVLC-0702.

Default settings (including the SSIDs) are per the HP's manual.

The manual states that the 802.11 radios are disabled by default.