ISONWIFI e+1

ISONWIFI e+ 1

FCC approval date: 26 April 2018
Country of manuf.: China

Type: wireless system

FCC ID: 2AO3G-E2

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Brand? Model?
FLA1: ? MiB (Brand? Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5TU32M16EG-AC)

Expansion IFs: none specified

WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: Brand? Model?
LAN speed: unspecified
LAN ports: 1
WAN speed: {{{lan_speed}}}
WAN ports: 1

abgn+ac

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1171 additional devices
of which 1 are ISONWIFI devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1211 additional devices
of which 1 are ISONWIFI devices

802dot11 OUI: none specified

Smart-Home WiFi System

"BH25G2813-DC_A3" is silkscreened on the board in the FCC photos.

FCC photos show "E05S" on the label which may have been reused from the visibly similar ISONWIFI ISonlink E05S which has very different internals.

The User Manual says that each device supports three modes:

• Intelligent AP (Access point)
• Smart Bridge (Range Extender?)
• Station (Wireless Bridge?)

Likely sold as...

• e+2: 1x router with 1 WAN/1 LAN and 1x satellite with 2 LAN
• e+3: 1x router with 1 WAN/1 LAN and 2x satellite with 2 LAN
• e+4: 1x router with 1 WAN/1 LAN and 3x satellite with 2 LAN
• e+5: 1x router with 1 WAN/1 LAN and 4x satellite with 2 LAN
• e+6: 1x router with 1 WAN/1 LAN and 5x satellite with 2 LAN
• e+7: 1x router with 1 WAN/1 LAN and 6x satellite with 2 LAN
• e+8: 1x router with 1 WAN/1 LAN and 7x satellite with 2 LAN
• e+9: 1x router with 1 WAN/1 LAN and 8x satellite with 2 LAN