This is a mirror of discontinued 'WikiDevi'. Enjoy!
Linksys E8350
Linksys E8350 v1
FCC approval date: 31 July 2014
(Est.) release date: 01 October 2014
Country of manuf.: China
Series: AC2400
Type: wireless router, media bridge
FCC ID: Q87-E8350
Industry Canada ID: 3839A-E8350
Power: 12 VDC, 3 A
Connector type: barrel
CPU1: Qualcomm IPQ8064 (1.4 GHz, 2 cores)
CPU2: Quantenna QT3840BC (500 MHz, 2 cores)
FLA1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Micron MT29F1G08ABBDA-H4:D)
FLA2: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25U3235FM2I-10G)
RAM1: 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Micron MT41K128M16JT-125:K × 2)
RAM2: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W631GG6KB-12)
Expansion IFs: USB 2.0 / eSATA (combo port), USB 3.0
USB ports: 2
SATA ports: 1
Serial: looks like it
WI1 chip1: Quantenna QT3840BC
WI1 chip2: Quantenna QT2518B
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 4x4:4
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Qualcomm Atheros QCA9880-BR4A
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL, RP-SMA
ETH chip1: Qualcomm IPQ8064
Switch: Qualcomm Atheros QCA8337
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
Flags: 256QAM
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1171 additional devices
of which 147 are Linksys devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1211 additional devices
of which 58 are Linksys devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Linksys E8400 | Q87-E8350 |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.
AC2400 Dual Band Gigabit Wi-Fi Router
This device has probably been renamed as the Linksys E8400 for marketing purposes.
Text including "ENWA04" appears to be silkscreened on the board in the FCC photos. WNC manuf?
Per the FCC photos..
- The NAND is marked w/ 3VE17 NW264 (FBGA code NW264: MT29F2G08ABBEAH4:E, 2Gbit SLC NAND), this conflicts with the data added by another user - if someone has photos plz add
- Each of the IPQ8x's RAM chips is marked w/ 3VK77 D9PTK (FBGA code D9PTK: MT41K128M16JT-125:K, 2Gb DDR3-1600 SDRAM).
Wi-Fi Certified (alt.) (as of 07/09/2014)
- The WFA certification indicates this device will be using Quantenna + QCA silicon.. which the FCC photos indicate it is indeed using.
According to the Product comparison chart of the Linksys EA7500, EA8500, E8350 and E8400 from Linksys, the E8350 supports wireless bridge mode but cannot operate as a wireless repeater/extender.
Specifications
- CPU: Qualcomm IPQ8064 Internet Processor (Dual-Core @1.4GHz)
- RAM: Micron MT41K128M16JT-125 (D9PTK) (DDR3L, x4/x8/x16)
- Small Flash: M25P80 (SPI 5.0), Macronix MX25U3235F (4MB)
- NAND Flash: Micron MT29F1G08ABBDAH4 (NW302 [VFBGA63])
- NAND Controller ID: 0x4030, NAND Device ID: 0x1580a12c
- WLAN1: Qualcomm Atheros QCA9880-BR4A (3x3 MIMO) DS
- WLAN2: Quantenna QT3840BC/QT2518B (802.11ac 4x4 MIMO)
- Switch: Qualcomm Atheros QCA8337-AL3C (7-port GbE)
- Bootinfo: console=ttyHSL1,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs
- Firmware: Build_for_Belkin_Linksys_AC2350_k3.4.0_2014-04-16_lke_8.9.0_r227 163_b16
Reviews