This is a mirror of discontinued 'WikiDevi'. Enjoy!
Medialink MWN-WAPR150N
Medialink MWN-WAPR150N
Manuf/OEM/ODM Tenda W268R
Type: wireless router
FCC ID: XKPMWN-WAPR150N, V7TW268R
Power: 9 VDC, 0.6 A
Connector type: barrel
CPU1: Ralink RT3050
FLA1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320EBTI-70G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS-6G)
Expansion IFs: none specified
WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6691;212, 6691, A121;1;
Default SSID: medialink (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 741 additional devices
of which 0 are Medialink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1211 additional devices
of which 3 are Medialink devices
| FCC ID | |
|---|---|
| AmbiCom WL151N-AR | V7TW268R |
| Tenda W268R (earlier) | V7TW268R |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless-N Broadband Router with Internal Antenna
Product page
It is possible that the hardware of these units may vary...
Per WiGLE and the User Guide, the default SSID seems to be medialink w/ an OUI of 14:35:8B (Mediabridge Products).
Additional external links
- On the DD-WRT forums (internal photos)
- 4MB Flash (Macronix MX29LV320EBTI-70G) and 16MB RAM (EtronTech EM639165TS-6G) in Broesphs post
- 9V, 0.6A on the label
- similar appearance to the Tenda W268R (later)
Images
M86's images
- external
angled
unit bottom
unit label
unit back
- internal
board top, in case
board top, in case, 2
board top, angled, from the front
board top, angled, from the back
antenna
Flash
RAM
heatsink'ed SoC, RF
board bottom
