This is a mirror of discontinued 'WikiDevi'. Enjoy!
Toshiba PCX2500 (DAZ8821F)
Toshiba PCX2500 (DAZ8821F)
FCC approval date: November 2002
Country of manuf.: Taiwan
Type: access point, cable modem
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Texas Instruments TNETC4400 (100 MHz)
FLA1: 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (STMicroelectronics M28W160CT)
RAM1: 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Hynix HY57V641620HG)
Expansion IFs: none specified
JTAG: yes, internal, 14-pin header, populated, JP2
Serial: yes, internal, 6-pin header, populated, JP3, (9600,8,N,1)
ETH chip1: Texas Instruments TNETC4400
ETH chip2: Realtek RTL8201L
LAN speed: 100M
LAN ports: 1
Stock FW OS: VxWorks
Flags: DOCSIS 1.0
Ethernet OUI: none specified
For a list of all currently documented Texas Instruments chipsets with specifications, see Texas Instruments.
----
Cable Modem
"KMA320010903", "TANSUI-A", "PCX V:X3", and a date code of 0245 is silkscreened on one PCX2500's board.
It's presumed to be running VxWorks.
Serial
Pinout
1 [3.3] (GND) 2 3 (TxD) (GND) 4 5 (RxD) (GND) 6 JP3
Boot log
Power-On
Cable Modem Image starter
Texas Instruments (C) 2002
Version 01.05d
Running image #1.
Trying to run default image
Prefix address - B0010000 Found image CRC OK; Decompressing
.................................
Well, looks OK; Let's go
Target Name: vxTarget
Attached TCP/IP interface to emac unit 0
NFS client support not included.
CPU is PUMA
Board is Tansui
HW Revision is 9.2.3.1
SW Version is 1.0.11 (Build 15_07_02:2) - Creation Date/Time: Jul 17 2002 / 12:05:57
PCX2500: MIPS Core speed is 100.00 MHz (100 Ticks per second)
0x947ffdf0 (tRootTask): Loading RNDIS End Driver...
0x947ffdf0 (tRootTask): Memory setup complete
0x947ffdf0 (tRootTask): Configuring rndis2...
0x947ffdf0 (tRootTask): Done loading RNDIS END.
Installed MIPS exception handler
Initialized BBIF
***********************************
** Toshiba Corporation ***
** DOCSIS based Cable Modem ***
***********************************
USB_Init
0x947ffdf0 (tRootTask): After USB_Init
InitCB
init RNDIS CB
Attaching network interface lo0... done.
Power Table Initialization Complete
TxWDT: Installing Anti-Bubble protection...
>>>
-> 0000001416:Trying to synchronize ...
0000001422:Scanning frequency 117000000Hz
... and so on.
Additional external links
- The board image shown (from here) has a different layout than the one populating this entry