This is a mirror of discontinued 'WikiDevi'. Enjoy!

Belkin F7D7602 v1

From DeviWiki (ex WikiDevi)
Jump to navigation Jump to search

Belkin F7D7602 v1

FCC approval date: 19 March 2013
Country of manuf.: China

Type: camera

FCC ID: K7SF7D7602V1
Industry Canada ID: 3623A-F7D7602V1

Power: 5 VDC, 1 A
Connector type: barrel

CPU1: Ralink RT5350
CPU2: AIT AIT8431T
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9825G6JH-6 × 2)

Expansion IFs: none specified

WI1 chip1: Ralink RT5350
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Ralink RT5350
LAN speed: 100M
LAN ports: 1

bgn

Default SSID: NetCamHDXXXX (1 addl. devices)

802dot11 OUI: EC:1A:59 (2 E, 10 W, 2012)

AIT not currently documented.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.


NetCam HD

"75053503", "2013-01-17", and "REV1.0" is silkscreened on the board in the FCC photos.

Also per the FCC photos, this device is using...

  • the RT5350 WiSoC
  • a 16MB Winbond W25Q128FVSG (25Q128FVSG) Flash chip
  • 2x Winbond W9825G6JH-6 (32MB each, 64MB total) RAM
  • an AIT AIT8431T multimedia processor
  • a Nuvoton NAU8810YG mono audio codec

Per the FCC label and the example label in the external photos...

  • the device has a default setup SSID pattern of NetCamHDXXXX (where XXXX appears to be the last 4 digits of the wireless interface MAC [upper case letters])
  • the device will use a EC:1A:59 OUI