Belkin F7D7602 v2

Belkin F7D7602 v2

FCC approval date: 12 February 2014
Country of manuf.: China

Type: camera

FCC ID: K7SF7D7602V2
Industry Canada ID: 3623A-F7D7602V2

Power: 5 VDC, 1 A
Connector type: barrel

CPU1: MediaTek MT7620A
FLA1: ? MiB (Winbond Model?)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Brand? 64X16DDR2)

Expansion IFs: none specified
Serial: yes, unpopulated, 4-pin header, internal, 3.3V TTL

WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

bgn

Default SSID: NetCamHDXXXX (1 addl. devices)

802dot11 OUI: EC:1A:59 (2 E, 10 W, 2012)

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Belkin F7D7602 v1	Ralink	Ralink
Belkin F7D7602 v2	MediaTek	MediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

---

NetCam HD+

"75076230", "2013-09-17", and "REV A3" is silkscreened on the board in the FCC photos.

Also per the FCC photos, this device is using...

• the MT7620A WiSoC
• a Winbond' Flash chip
• an AIT AIT8433T multimedia processor
• a Nuvoton NAU8810YG mono audio codec

Per the FCC label and the example label in the external photos...

• the device has a default setup SSID pattern of NetCamHDXXXX (where XXXX appears to be the last 4 digits of the wireless interface MAC [upper case letters])
• a EC:1A:59 OUI is shown

Probable used PSU(s)

The power supply shown used in the FCC external photos is a Belkin-branded DVE DSA-5PFE-05 FUS 050100.

DVE DSA-5PFE-05 FUS 050100 (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.2 A
Input connector: NEMA 1-15P Style: small, horiz.  Eff. level: 3
Output: 5 VDC, 1 A
Output connector: barrel (center +)  OD: ??  ID: ??  LEN: ??