Buffalo WLAR-L11-L

Buffalo AirStation WLAR-L11-L -US

Manuf/OEM/ODM Melco

FCC approval date: 20 July 1999
(Est.) release date: 2001
Country of manuf.: Japan

Type: wireless router

Power: 7 VDC, 0.82 A
Connector type: barrel

CPU1: Hitachi SH7709A (HD6417709A)
FLA1: 1 MiB 1,048,576 B 8,192 Kib 1,024 KiB 8 Mib 9.765625e-4 GiB  (Intel TE28F800B3TA90)
RAM1: 4 MiB 4,194,304 B 32,768 Kib 4,096 KiB 32 Mib 0.00391 GiB  (Vanguard VG3617161DT × 2)

Expansion IFs: PCMCIA (16-bit)
PCMCIA slots: 1
Serial: yes, internal, 4-pin header, unpopulated, 3.3V TTL, (57600,8,N,1)

WI1 module: Buffalo WLI-PCM-L11G
WI1 module IF: PCMCIA (16-bit)
WI1 chip1: Lucent HERMES I
WI1 chip2: Lucent THESEUS HS
WI1 chip3: Philips Model?
WI1 802dot11 protocols: b
WI1 antenna connector: MC

ETH chip1: ASIX AX88195P
ETH chip2: Realtek RTL8019AS
Switch: Kendin KS8995
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

b

Default SSID: AXXXXXGROUP

802dot11 OUI: 00:02:2D (1 E, 23 W, 2000)
Ethernet OUI: 00:40:26 (-, 1 W, 2000)

	FCC ID
Alvarion BreezeNET PC-DS.11b	IMRWLPCE24H
Apple AirPort Base Station M5757 (Graphite)	IMRWLPCE24H
Avaya World Card Silver/Gold	IMRWLPCE24H
Buffalo WLA-L11	IMRWLPCE24H
Compaq WL110	IMRWLPCE24H
Dell TrueMobile 1150 PC Card	IMRWLPCE24H
Enterasys CSIBD-AA-128	IMRWLPCE24H
IBM High Rate Wireless LAN PC Card	IMRWLPCE24H
Lucent ORiNOCO AP-500	IMRWLPCE24H
Lucent ORiNOCO RG-1000	IMRWLPCE24H
NEC Aterm WB45RL	IMRWLPCE24H
ORiNOCO PC Card	IMRWLPCE24H
ORiNOCO USB Client	IMRWLPCE24H
TRENDnet TEW-AP100	IMRWLPCE24H
YDI Diamond Card	IMRWLPCE24H NM5-A2400S

Hitachi not currently documented.
For a list of all currently documented Lucent (Agere) chipsets with specifications, see Lucent.

Product page (JP)

Internals and part breakdown

"LRLAN-BA" is silkscreened on the back of the board.

Images

board top
board bottom

Serial

Pinout

1         J1         4
(TxD) (RxD) (3.3) (GND)

Info derived from

boot log


ac000000 -- ac3fe7fc : start 4byte mem check
Now filling...ac000000 -- ac3fe7ff (adrs)
   ac000000
   ac100000
   ac200000
   ac300000
checking..
   ac000000
   ac100000
   ac200000
   ac300000
mem check complete

ac000000 -- ac3fe7fc : FILL 0 data

210641
P_CLK= 20 MHz  DBserial=57600  serial=115200   Compiled CPU=SH7709A
WLA_CLK_MODEHI= 1
_D_ROM,_D_ROM_END= 91e30 a0fcf
_PFX_BGN,_PFX_END= a0fd0 b68a3
_B_BGN,_B_END= c0362ec c075463
_CFX_BGN,_CFX_END= b68a4 b810b
_D_BGN,_D_END= c02714c c0362eb
_RAM_END=c07646b
_R_CFX_BGN,_R_CFX_END= c0158d4 c01713b
_R_PFX_BGN,_R_PFX_END= c000000 c0158d3
Free Program Area=27ef4
 -- WLA_FLASH_BASE --
 firmsize=753932
 chksum=b3fa7706
 fwcode=5
 author=HIRAI HABA OHARA TAMURA YAMAZAKI SUGAI
 date=Mon Feb 19 19:25:16 2001
 sig=WLAR-L11-L-US
 ver=112
 fwcode=5
 WLA_TYPE=7
 WLA_LANG=1
 -- WLA_FLASH_BASE --
HW model=00000012
all_initialize end
------ Application_Initialize (freemem=3701652)------
210641: *****  System_startup_task  *****
Init_SCI_Driver(): Create Driver
sci end
Init_SCI_Driver end
 -- WLA_FLASH_BASE --
INTEL TE28F800B3T
 -- WLA_FLASH_BASE --
INTEL TE28F800B3T
HW model=00000012
 -- WLA_FLASH_BASE --
210641: Network Initialize start
210641: WLA setup data loading..
00 40 26 a2 03 a9 00 00-00 00 00 00 00 00 00 00    .@&.............

AX88195 MAC 00:40:26:A2:03:A9
WEB data size=4884
WEB data size=5850
210641: mode is WLA_MODE_ROUTING
** NetDriver [WLARL11] Ver.1.00 (Feb 19 2001-19:18:31)
-> WLARL11_Init
** NetDriver [AX88195] Ver.1.00 (Feb 19 2001-19:18:05)
-> AX88195_Init
*** io=b4000600
-> AX88195_Open_Device in
== start AX88195 InternalRAM check ==
<- AX88195_Open_Device end
MAC ADR= 00 40 26 A2 03 A9
<- AX88195_Init
** NetDriver [LUCENT] Ver.1.00 (Feb 19 2001-19:17:57)
-> LUCENT_Init
-> LUCENT_Open_Device in
TPL code=1 size=3
TPL code=17 size=4
TPL code=1d size=5
▒▒▒x▒▒1▒o▒[▒W▒▒▒▒
        version=5 0
        MELCO WLI-PCM-L11 Version 01.01
----  wvlan2_private  ----
PortType                        =1
Channel                 =0
TxRateControl           =3
APDensity                       =1
RTSThreshold            =2347
PMEnabled                       =0
MulticastReceive        =1
MaxSleepDuration        =100
MACAddress              =00:00:00:00:00:00
NetworkName             =AirStation
StationName             =AIRCONNECT
EnableEncryption        =0
WEPOption                       =0
Key1                            =
Key2                            =
Key3                            =
Key4                            =
TransmitKeyID           =1
----  IFB  ----
IFB_Version             =5
IFB_IOBase              =ba000300
IFB_IO_Range            =40
IFB_Magic                       =7d37
IFB_HCF_VersionMajor =2
IFB_HCFVersionMinor  =22
IFB_TickIni             =262144
IFB_CfgTblSize  =352
----  driver Info  ----
len                     =13
typ                     =2085
driver_name     =WVLAN49
driver_version  =400
HCF_version     =222
IO_address      =300
IO_range                =128
IRQ_number      =49
card_stat               =0
frame_type      =1
----  driver Info  ----
len             =5
typ             =2086
comp_id =49
variant =1
version_major   =4
version_minor   =0
WaveLAN AP Firmware download:Done.
        Port Type fail.
        RTS Threshold fail.
        Tx Rate Control fail.
        Power Management fail.
        CFG_CNF_MCAST_RX fail.
        CFG_CNF_MAX_SLEEP_DURATION fail.
WVLAN49: WaveLAN/IEEE,io_addr 0xba000300,irq_vect 49,
   mac_address 00:00:00:00:00:00
<- LUCENT_Open_Device end
LUCENT MAC ADR= 00 02 2D 0F A8 FA
<- LUCENT_Init
<- WLARL11_Init
** NetDriver [RTL8019] Ver.1.00 (Feb 19 2001-19:18:10)
-> RTL8019_Init
*** io=bb000000
-> RTL8019_Open_Device in
CONFIG0=c
== start RTL8019 InternalRAM check ==
<- RTL8019_Open_Device end
RTL8019 MAC ADR= 00 40 26 A2 03 AA
<- RTL8019_Init
GetMAC iface=1
RTL8019_Ioctl_Function 0
GetMAC iface=0
AX88195_Ioctl_Function 0
RTL8019_Ioctl_Function 1
RTL8019 MAC ADR= 00 40 26 A2 03 AA
-> RTL8019_Reset
<- RTL8019_Reset
**********   DHCPD   **********
*** DHCP Lease Network(0): 192.168.0.2, 192.168.0.17
GR_DHCPD_Set_CtrlData: DHCPSused=1
**** DHCPD complete *****
** Rip2 Bootup ******************
NERR_FATAL/rip2.c/NU_Rip_Initialize 6
IP is 1.1.1.1
** AX88195 Set Half Duplex
-> AX88195_Reset
<- AX88195_Reset
-- RATE=4
        Port Type fail.
        RTS Threshold fail.
        Tx Rate Control fail.
        Power Management fail.
        CFG_CNF_MCAST_RX fail.
        CFG_CNF_MAX_SLEEP_DURATION fail.
        Port Type fail.
        RTS Threshold fail.
        Tx Rate Control fail.
        Power Management fail.
        CFG_CNF_MCAST_RX fail.
        CFG_CNF_MAX_SLEEP_DURATION fail.
-- ESSID=A203A9GROUP
        Port Type fail.
        RTS Threshold fail.
        Tx Rate Control fail.
        Power Management fail.
        CFG_CNF_MCAST_RX fail.
        CFG_CNF_MAX_SLEEP_DURATION fail.
-- CHANNEL=11
        Port Type fail.
        RTS Threshold fail.
        Tx Rate Control fail.
        Power Management fail.
        CFG_CNF_MCAST_RX fail.
        CFG_CNF_MAX_SLEEP_DURATION fail.
-- WEP Disable
        Port Type fail.
        RTS Threshold fail.
        Tx Rate Control fail.
        Power Management fail.
        CFG_CNF_MCAST_RX fail.
        CFG_CNF_MAX_SLEEP_DURATION fail.
** LUCENT WEP Option Disable
----  IFB  ----
IFB_Version             =5
IFB_IOBase              =ba000300
IFB_IO_Range            =40
IFB_Magic                       =7d37
IFB_HCF_VersionMajor =2
IFB_HCFVersionMinor  =22
IFB_TickIni             =262144
IFB_CfgTblSize  =352
        Port Type fail.
        RTS Threshold fail.
        Tx Rate Control fail.
        Power Management fail.
        CFG_CNF_MCAST_RX fail.
        CFG_CNF_MAX_SLEEP_DURATION fail.
-- MAC Filter Disable
**** SetPacketFilter
*** ▒ȈՃt▒B▒▒▒^ IDENT▒p▒P▒b▒g▒X▒▒▒[▒ݒ▒ ▒L▒▒
************* SetRIP
NERR_FATAL/rip2.c/NU_Rip2_Change_Command 1
GetMAC iface=0
AX88195_Ioctl_Function 0
GR_ReceiveQueue captured (0)
DH_Send_Packet

Buffalo WLAR-L11-L

Contents

Images

Serial

Pinout

Info derived from

Navigation menu

Search