This is a mirror of discontinued 'WikiDevi'. Enjoy!
Netgear WNR1000v2
Jump to navigation
Jump to search
Netgear WNR1000 v2
Manuf/OEM/ODM Delta Networks
FCC approval date: 25 September 2009
Country of manuf.: China
Amazon image
ASINs
B00894WP4S (13px, On Amazon, On CCC)
B001UI4RTG (13px, On Amazon, On CCC)
multiple revisions of this device, use caution
Type: wireless router
FCC ID: PY309300122
Industry Canada ID: 4054A-09300122
Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
CPU1: Atheros AR7240 (400 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3205DM2I-12G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Hynix HY5DU561622FTP-D43)
Expansion IFs: none specified
Serial: yes, 4-pin header, populated, internal, 3.3V TTL, (115200,8,N,1), JP2
WI1 chip1: Atheros AR9285
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
ETH chip1: Atheros AR7240
Switch: Atheros AR7240
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock bootloader: U-Boot 1.1.4
Stock FW OS: Linux 2.6.15 OpenWrt-deriv
Default SSID: NETGEAR (43 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1171 additional devices
of which 98 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 406 additional devices
of which 295 are Netgear devices
802dot11 OUI: 00:24:B2 (14 E, 16 W, 2008), 00:26:F2 (10 E, 10 W, 2009), 30:46:9A (11 E, 14 W, 2009), A0:21:B7 (8 E, 8 W, 2010), C0:3F:0E (13 E, 12 W, 2009), C4:3D:C7 (8 E, 5 W, 2009), E0:91:F5 (11 E, 12 W, 2009)
Ethernet OUI: 00:24:B2 (14 E, 16 W, 2008), 00:26:F2 (10 E, 10 W, 2009), 30:46:9A (11 E, 14 W, 2009), A0:21:B7 (8 E, 8 W, 2010), C0:3F:0E (13 E, 12 W, 2009), C4:3D:C7 (8 E, 5 W, 2009), E0:91:F5 (11 E, 12 W, 2009)
| FCC ID | |
|---|---|
| Netgear WN604 | PY309300122 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Netgear WNR1000v1 | Atheros | Atheros | Atheros |
| Netgear WNR1000v2 | Atheros | Atheros | |
| Netgear WNR1000v2h2 | Atheros | Atheros | |
| Netgear WNR1000v3 | Broadcom | Broadcom | |
| Netgear WNR1000v4 | MediaTek | MediaTek |
For a list of all currently documented Atheros chipsets with specifications, see Atheros.
N150 Wireless Router
"2976333104" is silkscreened on one production model board.
- The same basic hardware is used for the Netgear WN604.
- The same hardware is also used in Netgear WNR612v2.
- all ports (both uplink and downlink) feature automatic MDI/crossover
Additional external links
Wikis
Reviews
Forum threads
- OpenWRT Builds for NETGEAR WNR1000V2/VC on forum.openwrt.org
- Flashing to OpenWRT from Factory Firmware on gist.github.com
- Netgear WNR1000v2: some success! on forum.openwrt.org
- Netgear WN604/WNR612v2/WNR1000v2 on forum.openwrt.org
- Netgear WNR1000v2 Request on dd-wrt.com
- Netgear WNR1000v2 Spec. on dd-wrt.com
PSU
The power adapter included with the device is a PI Electronics (H.K.) Ltd.
- T012LF1209 16100-2LF (12V, 1A), Netgear P/N: 332-10166-01.
- Centre positive 5,5mm/2,1mm barrel. Efficiency Level V,
- emits high frequency squeal/high-pitched electronic whine
- sound WNR1000v2 itself is silent. UL File Number: E186735.
| PI Electronics T012LF1209 16100-2LF (more) | |||||
|---|---|---|---|---|---|
| Input: 100-120 VAC ~ 50/60 Hz, 0.5 A | |||||
| Input connector: NEMA 1-15P Manuf. in: China | |||||
| Output: 12 VDC, 1 A | |||||
| Output connector: barrel (center +) OD: 5.5 mm ID: 2.1 mm LEN: 9.5 mm | |||||
Serial
Pinout
---> to AR9285 Wifi Controller
UART JP2
•
(GND) (RxD) (TxD) [3.3V]
<--- to AR7140 CPU
Info derived from
boot log
| boot log |
|---|
U-Boot 1.1.4 (Sep 3 2009 - 20:06:10)
WNR1000v2-VC (ar7240) U-boot dni7 V0.8
DRAM:
sri
#### TAP VALUE 1 = a, 2 = a
32 MB
Top of RAM usable for U-Boot at: 82000000
Reserving 269k for U-Boot at: 81fbc000
Reserving 192k for malloc() at: 81f8c000
Reserving 44 Bytes for Board Info at: 81f8bfd4
Reserving 36 Bytes for Global Data at: 81f8bfb0
Reserving 128k for boot params() at: 81f6bfb0
Stack Pointer at: 81f6bf98
Now running in RAM - U-Boot at: 81fbc000
id read 0x100000ff
flash size 4194304, sector count = 64
Flash: 4 MB
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
Fetching MAC Address from 0x81febc00
Fetching MAC Address from 0x81febc00
: cfg1 0xf cfg2 0x7014
eth0: 00:26:f2:9f:a2:08
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:26:f2:9f:a2:07
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Trying eth1
eth1 link down
FAIL
Trying eth0
eth0 link down
FAIL
Client starts...[Listening] for ADVERTISE...TTT
Retry count exceeded; boot the image as usual
nmrp server is stopped or failed !
Hit any key to stop autoboot: 0
Verifying Checksum ... OK
### SQUASHFS loading 'image/uImage' to 0x80800000
### SQUASHFS load complete: 623510 bytes loaded to 0x80800000
## Booting image at 80800000 ...
Image Name: Linux Kernel Image
Created: 2009-09-09 16:01:04 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 623446 Bytes = 608.8 kB
Load Address: 80002000
Entry Point: 801c1000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 801c1000) ...
## Giving linux memsize in bytes, 33554432
Starting kernel ...
Booting AR7240(Python)...
Linux version 2.6.15 (root@anderson) (gcc version 3.4.4
(OpenWrt-2.0)) #199 Wed Sep 9 23:10:19 CST 2009
flash_size passed from bootloader = 4
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:08
rootfstype=squashfs init=/etc/preinit mtdparts=ar7240-nor0:256k(u-boot),
64k(u-boot-env),3392k(rootfs),64k(config),128k(language_table),
64k(pot),64k(traffic_meter),64k(ART),3473344@327744(mount_fs)
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 170.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30428k/32768k available (1470k kernel code,
2324k reserved, 313k data, 100k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Returning IRQ 48
AR7240 GPIOC major 0
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
9 cmdlinepart partitions found on MTD device ar7240-nor0
Creating 9 MTD partitions on "ar7240-nor0":
0x00000000-0x00040000 : "u-boot"
0x00040000-0x00050000 : "u-boot-env"
0x00050000-0x003a0000 : "rootfs"
0x003a0000-0x003b0000 : "config"
0x003b0000-0x003d0000 : "language_table"
0x003d0000-0x003e0000 : "pot"
0x003e0000-0x003f0000 : "traffic_meter"
0x003f0000-0x00400000 : "ART"
0x00050040-0x003a0000 : "mount_fs"
mtd: partition "mount_fs" doesn't start on an erase block boundary
-- force read-only
u32 classifier
Perfomance counters on
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
ip_conntrack version 2.4 (256 buckets, 2048 max) - 228 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
IPP2P v0.8.2 loading
DNIFILTER loading
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
arch/mips/ar7240/ar7240_gpio.c (ar7240_simple_config_init)
JUMPSTART_GPIO: 12
ar7240: calling simple_config callback..
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 100k freed
Algorithmics/MIPS FPU Emulator v1.5
- init -
init started: BusyBox v1.4.2 (2009-09-09 23:04:26 CST) multi-call binary
Loading data from /dev/mtd/3 ...
The data configuration is Valid
The data center is Running ...
ipt_CONENAT: module license 'unspecified' taints kernel.
ip_conntrack_rtsp v0.6.21 loading
ip_nat_rtsp v0.6.21 loading
ip_conntrack_pptp version 3.1 loaded
ip_nat_pptp version 3.0 loaded
Generating Rules...
Done!
rmmod: ip_nat_dnisip.ko: Success
rmmod: ip_conntrack_dnisip.ko: Success
POT is Running...
POT is Finished!!!
The POT-(Get/Set) Demo is Running ...
SN: 28C29C5V3C300
WAN MAC: 00:26:F2:9F:a2:08
AG7240: Length per segment 1536
AG7240: Max segments per packet 1
AG7240: Max tx descriptor count 40
AG7240: Max rx descriptor count 252
AG7240: fifo cfg 3 01f00140
AG7240CHH: Mac address for unit 0
AG7240CHH: 00:26:f2:9f:a2:08
AG7240CHH: Mac address for unit 1
AG7240CHH: 00:26:f2:9f:a2:07
INIT-SWITCH: Default WAN MAC is : 00:26:f2:9f:a2:08
ag7240_ring_alloc Allocated 640 at 0x80372000
ag7240_ring_alloc Allocated 4032 at 0x80299000
Setting PHY...
device eth1 entered promiscuous mode
number of br ports=1
ag7240_ring_alloc Allocated 640 at 0x81c0ac00
ag7240_ring_alloc Allocated 4032 at 0x81c1d000
ATHRS26: resetting s26
ATHRS26: s26 reset done
ar7240: calling simple_config callback..
Setting PHY...
udhcp server (v0.9.8) started
The attached devices demo is Running ...
killall: utelnetd: no process killed
killall: telnetenable: no process killed
The telnetenable is running ...
Deleting static route ... Done!
Adding static route ... Done!
The HNAP Demo is running on br0 : 192.168.1.1 00:26:F2:9F:A2:07
ag7240_ring_free Freeing at 0x80372000
ag7240_ring_free Freeing at 0x80299000
ag7240_ring_alloc Allocated 640 at 0x80372000
ag7240_ring_alloc Allocated 4032 at 0x80299000
Setting PHY...
ag7240_ring_free Freeing at 0x80372000
ag7240_ring_free Freeing at 0x80299000
ag7240_ring_alloc Allocated 640 at 0x80372000
ag7240_ring_alloc Allocated 4032 at 0x80299000
Setting PHY...
udhcp client (v0.9.8) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background.
traffic_meter config_update : killall: traffic_meter: no process killed
killall: ntpclient: no process killed
time zone index is : 20
Run NTP Client with setting: pri:time-b.netgear.com sec:time-c.netgear.com
killall: miniupnpd: no process killed
Jan 1 00:00:33 miniupnpd[378]: listening on 192.168.1.1:5555
lo no wireless extensions.
br0 no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
/etc/rc.d/rc.wlan: /etc/rc.d/rc.wlan: 56: uname: not found
Args: 1
ath_hal: 0.9.17.1 (AR5416, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc
ath_pci: 0.9.4.5 (Atheros/multi-bss)
wifi0: Atheros 9285: mem=0x10000000, irq=48 hw_base=0xb0000000
wlan: mac acl policy registered
wlan_me: Version 0.1
Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved
wifi1 no private ioctls.
Creating ap for NETGEAR on
Added ath0 mode master
Interface doesn't accept private ioctl...
HALDbg (8BE0): Operation not permitted
Created ath0 mode ap for NETGEAR
/etc/ath/activateVAP: /etc/ath/activateVAP: 56: uname: not found
lo no wireless extensions.
br0 no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
wifi0 no wireless extensions.
device ath0 entered promiscuous mode
number of br ports=2
/etc/ath/activateVAP: /etc/ath/activateVAP: 1: arping: not found
>>>>> WPS MODE, 1
>>>>> WPS ENABLED, PSK
cat: /etc/wpa2/WSC_ath0.conf: No such file or directory
>>>>> WPS Translate, Index:0
Making Topology File . . .
Starting Firewall...
Reading topology file /var/run/topology.conf ...
Done!
time zone index is : 20
Run NTP Client with setting: pri:time-b.netgear.com sec:time-c.netgear.com
dnsmasq: started, version 2.39 cache disabled
dnsmasq: compile time options: IPv6 GNU-getopt
ISC-leasefile no-DBus no-I18N no-TFTP
dnsmasq: using local addresses only for domain lan
dnsmasq: failed to access /tmp/dhcp.leases: No such file or directory
dnsmasq: no servers found in /tmp/resolv.conf, will retry
checksum = 0xFF, len = 131072
There is not language table in flash or language table was broken!
gui_region = English
region = English, download_region =
Update string table successfully, memory usage: 248KB.
The httpd server is running ...
Start utelnetd by telnetenable
traffic_meter start : .
Boot up procedure is Finished!!!
Please press Enter to activate this console.
|
cat /proc/cpuinfo
root@WNR1000v2:/# cat /proc/cpuinfo system type : Atheros AR7240 (Python) processor : 0 cpu model : MIPS 24K V7.4 BogoMIPS : 225.28 wait instruction : yes microsecond timers : yes tlb_entries : 16 extra interrupt vector : yes hardware watchpoint : yes ASEs implemented : mips16 VCED exceptions : not available VCEI exceptions : not available
ps
| ps |
|---|
root@WNR1000v2:/# ps
PID Uid VmSize Stat Command
1 root 356 S init
2 root SWN [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kthread]
8 root SW< [kblockd/0]
30 root SW [pdflush]
31 root SW [pdflush]
33 root SW< [aio/0]
32 root SW [kswapd0]
44 root SW [mtdblockd]
131 root 268 S klogd
135 root 228 S datalib
206 root 108 S /usr/sbin/potval
283 root 236 S udhcpd /tmp/udhcpd.conf
287 root 124 S /usr/sbin/net-scan
296 root 156 S /usr/sbin/telnetenable
300 root 112 S /usr/sbin/hnapd
329 root 80 S udhcpc -b -i eth0 -h WNR1000v2 -r 0.0.0.0
378 root 276 S /usr/sbin/miniupnpd
1474 root 124 S /usr/bin/wlanlog
1482 root 280 S syslogd -m 0 -T GMT+8
1494 root 220 S /usr/sbin/ntpclient
1499 root 348 S crond -c /tmp/etc/crontabs -T GMT+8
1502 root 372 S /usr/sbin/dnsmasq -c 0 -d -h -r /tmp/resolv.conf
1507 root 724 S uhttpd
1510 root 140 S inetd
1515 root 232 S /usr/bin/detcable 2
1518 root 420 S /bin/sh /sbin/button_detecte
1546 root 304 S /sbin/traffic_meter
1553 root 456 S -sh
2222 root 284 S /bin/sleep 1
2225 root 372 R ps
|
lsmod
| lsmod |
|---|
root@WNR1000v2:/# lsmod Module Size Used by Tainted: P wlan_scan_ap 9152 0 ath_pktlog 14336 0 wlan_me 9152 0 wlan_acl 5152 0 wlan_wep 5536 0 wlan_tkip 12608 0 wlan_ccmp 7968 0 wlan_xauth 1024 0 ath_pci 58496 0 ath_dev 123344 2 ath_pktlog,ath_pci ath_rate_atheros 46928 2 ath_pktlog,ath_dev wlan 248448 11 wlan_scan_ap,ath_pktlog,wlan_me,wlan_acl,wlan_wep, wlan_tkip,wlan_ccmp,wlan_xauth,ath_pci,ath_dev wlan_ext 3328 1 wlan ath_hal 276928 4 ath_pktlog,ath_pci,ath_dev ar7240gpiointr 4000 0 ar7240gpio 2720 0 ag7240_mod 32272 1 ar7240gpio ip_nat_dnisip 6304 0 ip_conntrack_dnisip 5776 1 ip_nat_dnisip ipt_TRIGGER 3200 1 ipt_spiadvDoS 12912 1 ipt_NETGEAR_REJECT 12320 0 ipt_urlBlock 5200 0 ipt_dnshijack 1408 1 ipt_spiDoS 3136 2 ip_nat_pptp 4528 0 ip_conntrack_pptp 7312 1 ip_nat_pptp ip_nat_dnirtsp 6224 0 ip_conntrack_dnirtsp 8256 1 ip_nat_dnirtsp ip_nat_dnih323 6016 0 ip_conntrack_dnih323 37440 1 ip_nat_dnih323 ip_nat_STARCRAFT 1504 0 ipt_CONENAT 1760 2 ip_nat_ftp 2464 0 ip_conntrack_ftp 5520 1 ip_nat_ftp |
cat /proc/bus/pci/devices
| devices |
|---|
root@WNR1000v2:/proc/bus/pci# cat devices 0000 168c002b 30 10000004 00000000 00000000 00000000 00000000 00000000 00000000 00010000 00000000 00000000 00000000 00000000 00000000 00000000 ath_pci |