This is a mirror of discontinued 'WikiDevi'. Enjoy!
Netgear WNR612v2
Netgear WNR612 v2
Manuf/OEM/ODM Delta Networks
FCC approval date: 01 April 2010
Country of manuf.: China
Series: N150
Type: wireless router
FCC ID: PY309400124
PCB ID: 2976352402
Power: 7.5 VDC, 1 A
Connector type: barrel
CPU1: Atheros AR7240 (400 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3205DM2I-12G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Hynix HY5DU561622FTP-D43)
Expansion IFs: none specified
Serial: yes, 4-pin header
WI1 chip1: Atheros AR9285
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Atheros AR7240
Switch: Atheros AR7240
LAN speed: 100M
LAN ports: 2
WAN speed: 100M
WAN ports: 1
bgn
Third party firmware supported: OpenWrt
Default SSID: NETGEAR (43 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1171 additional devices
of which 98 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 406 additional devices
of which 295 are Netgear devices
802dot11 OUI: 30:46:9A (11 E, 14 W, 2009), A0:21:B7 (8 E, 8 W, 2010), C0:3F:0E (13 E, 12 W, 2009)
Ethernet OUI: 30:46:9A (11 E, 14 W, 2009), A0:21:B7 (8 E, 8 W, 2010), C0:3F:0E (13 E, 12 W, 2009)
| FCC ID | |
|---|---|
| On Networks (Netgear) N150R | PY309400124 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Netgear WNR612v2 | Atheros | Atheros | |
| Netgear WNR612v3 | Realtek | Realtek |
For a list of all currently documented Atheros chipsets with specifications, see Atheros.
N150 Wireless Router • Support page
"2976352402" is silkscreened on the board in the FCC photos.
Per this NETGEAR.ru forum post, A0:21:B7 is an assumed OUI of the device.
Atheros AR7240 device. The WNR612v1 may share the same basic hardware.
- It shares all the hardware with WNR1000v2 and flashing it to WNR1000v2
- firmware (over TFTP) works. The only difference is the number of LAN ports.
- The bootloader of the device uses a TFTP server. To access the TFTP server
- the user must hold reset button before the device is powered on and keep on
- holding it for a few seconds.